CC2531 Sniffer Bare Board USB Module
Model CC2531 manufactured by Unbranded
Confirmed working with
If the device is following Zigbee standards it is possible it will work with other gateway solutions, it is just not confirmed as working yet!
- USB connected Zigbee adapter with PCB or external antenna
- Cheap but may not be powerful enough for larger networks.
To be able to use it as a coordinator or router you need to flash the CC2531_ Z-Stack-firmware.
Identify the required pins and follow flashing instructions:
- flash using CCLoader and NodeMCU/Wemos D1 mini (or similar ESP8266 board)
- flash using Raspberry Pi
- flash using CC Debugger