Model 064879 manufactured by Legrand
Confirmed working with
If the device is following Zigbee standards it is possible it will work with other gateway solutions, it is just not confirmed as working yet!
Some Legrand devices work only on Zigbee channel 11. With certain devices you need the Legrand Hub to update the firmware to have all features available.
You must have access to the reset button on the device
Make sure that the gateway is not in pairing mode
Press 8s (approximately) on the reset button of the device (until it turns red) to ensure its disconnected from the network
Now switch your gateway to pairing Mode
Press the reset button 8s (approximately) to start the pairing procedure
Make successive clicks on the reset button (every second), until the LED turns green
Detailed pairing instructions and additional information on pipiche38 wiki.
Still WIP, power measurement is not working.