Confirmed working with
OTA UpdatesThis device supports OTA updates. For more information see your gateway's software documentation.
Read Before Pairing
Philips LivingColors IRIS and Philips LivingColors Bloom Devices that comes with Philips (HUE) Remote Gen 2 (Touch Wheel) or Gen 3 (Round Click Wheel) can be paired via Zigbee. Devices with Gen 1 Remote don’t use Zigbee and can not be paired. The Philips LivingColors Remote can not be paired via Zigbee because it only support ZigBee Light Link (ZLL).
To Pair hold Button ON and Bottom Left Key (Favorite 1) on the Remote in Front of the Device until the Device Light blinks and lights Orange. If connection was succesfull the Device Light will light Green.
WARNING: If you pair your Device to a Zigbee Network which is not using a ZLL Channel you can’t reset the Device with the Philips LivingColors Remote Gen 3. The Gen 3 Remote will only try ZLL Channels to find the Device! Maybe it’s possible to reset the Device with a Philips LivingColors Remote Gen 2 as it should try all Zigbee Channels to find the Device.
Pairing InstructionsFactory resetting a Hue bulb can be accomplished in one of 4 ways:
- Touchlink factory reset - See Touchlink article.
- Hue bridge - When the bulb is still connected to the Hue bridge, you can simply factory reset the bulb. by removing it from the bridge via the Hue app.
- Hue dimmer switch - Factory reset a Hue bulb with Hue dimmer switch Video instructions.
- Trådfri remote control - Pressing and holdg the reset button on the bottom of the remote (next to the battery). This may not always work.