CC2530 Router
Model ptvo.router manufactured by DIY
Zigbee ID: lumi.router
| Supports: |
|---|
| description |
| rssi |
| type |
| state |
| Available from: |
|---|
| Amazon.com |
| Aliexpress.com |
| Banggood.com |
| Manufacturer: |
|---|
| Ptvo.info |
Confirmed working with
If the device is following Zigbee standards it is possible it will work with other gateway solutions, it is just not confirmed as working yet!
Build and configuration instructions
Pairing
At first boot it will automatically be in pairing mode and join your network. To reset it into pairing mode power-cycle it three times as follows:
1) power on 2) wait 2sec 3) power off 4) repeat above steps 2 further times 5) power on and wait for it to join your network
Flashing Instructions
Identify the required pins and follow flashing instructions:
- flash using CCLoader and NodeMCU/Wemos D1 mini (or similar ESP8266 board)
- flash using Raspberry Pi
- flash using CC Debugger